|
|
NEW dominator style carbs. These will be replacing the older carbs.
Much more detail was added.
|
$10.00
|
|
|
9" ford rearends. These are stock length and can be cut to fit
tubbed cars. They are braced and set up with brackets for 4-link or ladderbar suspenssion, and coil over shocks.
|
$12.00
|
|
|
3 butterfly injector hat. The butterflys work. Cut them to fit your
application.
|
$15.00
|
|
|
4 butterfly injector hat. Same as the 3, but with 4 butterflys.
|
$15.00
|
|
|
flowmaster style mufflers.
|
$2.00
|
|
|
brake master cylinder with booster 2. This is the smallest one.
It will fit in tighter spaces.
|
$2.00
|
|
|
Injection intakes 1. These have been updated to make them easier
to make, but also metal stacks have been added. They will be the same heigth as they were before. (Another style of injection intake is below)
|
$10.00
|
|
|
oil tank
|
$2.00
|
|
|
Old school finned valve covers for SBC
|
$2.00
|
|
|
Brake booster W/master cylinder 3. This is a larger set up.
|
$2.00
|
|
|
Fuel cell 2. This is a smaller fuel cell made to fit between roll bar
in trunk. Also comes with sump.
|
$3.00
|
|
|
Racing steering wheel.
|
$2.00
|
|
|
Electric water pump/timing cover. This is a front engine accessory
with an electric water pump and a cast aluminum(looking) timing cover. Used mainly on a chevy engine, but for diecast race
cars will work for other engine types.
|
$1.50
|
|
|
Vitcor JR. style intake. This intake will fit my BBC, GMP 572, and other
BBC engines. (ertl,hwy 61, gmp, etc)
|
$4.00
|
|
|
Dodge transmission 727.
|
$4.00
|
|
|
Injection intake 2 This is a second type of intake(sent by a friend)which
we've added metal stacks to. There are 2 lengths of stacks for this intake. The picture shows the short stacks.
|
$8.00
|
|
|
MSD7al2 box these will come with a decal. Scroll down to see MSD7al2 box complete
ready to install.
|
$3.00
|
|
|
Underhood screw type supercharger. These were made for the LS engines,
but will fit others. Some spacers or moddifications may need to be made.
|
$3.00
|
|
|
Race fuel injection intake. This was made for the LS engines, but will
fit other engines also. Some spacers of moddifications may be needed.
|
$3.00
|
|
|
seat set style1
|
$8.00
|
|
|
Seat set style 2
|
$8.00
|
|
|
Seat set style 3
|
$8.00
|
|
|
MSD7al2 complete. These are the same as the others, but ready to install.
These are painted with 4 different colors, and have the decal and powers wires added.
|
$6.00
|
|
|
B&M Pro Bandit style shifter.
|
$4.00
|
